Skip to main content

Oracle certification exam HP2-061 (HP ProLiant Server Maintenance ) Q&A

By Solar Expert Advisory
HP2-061 (HP ProLiant Server Maintenance )
1. WhichHP ProLiant Server feature communicates regularly with the HP Server Health
Driver to provide automatic restarting after a processor failure?
A. Embedded HP Diagnostic Utility
B. RBSU - Rom Based Server Utility
C. ASR - Automatic Server Recovery
D. HP Systems Management Homepage

2.Whatare benefits of Serial ATA (SATA) drives? Select TWO.
A. highest reliability
B. highest capacity
C. lowest price per GB
D. highest performance
E. medium to heavy read/write operations

3. How do you migrate a four disk RAID 0+1 volume on a SmartArray controller to RAID
5?
A. Use the Windows Disk Management applet.
B. In Windows, run the Array Configuration Utility (ACU).
C. Boot the system and press F9 to access the ROM Based Setup Utility (RBSU).
D. Boot the system and press F8 to access the Online ROM Configuration for Arrays
(ORCA) utility.

4. What advantage does Direct Attached Storage (DAS) have over a Storage Area Network
(SAN)?
A. easy deployment
B. sufficient use of resources
C. server based management model
D. easily shared resources across multiple servers

5. On which server family is the iLO Advanced Pack enabled by default?
A. BL serversB. CL servers
C. DL servers
D. ML servers

6. Whatare features of HP Systems Insight Manager? Select FOUR.
A. device discovery
B. extended integration
C. fundamental integration
D. easy and rapid installation
E. secure remote management
F. web browser and command-line interface

27. Which iLO capabilities are enabled with the iLO Advanced Pack? Select THREE.
A. Virtual Media
B. Virtual Power
C. Active Directory Integration
D. iLO Online Firmware Update
E. Terminal Services Pass-through
F. Virtual Graphical Remote Console
G. HP Systems Insight Manager Integration

8.Our customer reports that theHPuninterruptiblepower supply (UPS) repeatedly makes a
clicking sound. What is happening?
A. The clicking sound is a warning that the batteries are about to fail.
B. The batteries in the UPS have failed and are disconnecting themselves.
C. The UPS is regulating the power through the 'buck/double boost' feature.
D. The batteries have entered the 'intelligent charging' state and the sound will stop once
the batteries have rapid charged to 90%.

9.What is the maximum number of P-class Blade Server Enclosures supported by one
Scalable Bus Bar?
A. 2
B. 3
C. 5
D. 6

10 WhichHP reference tool is available for each ProLiant product and includes information
on features, standard parts and options, models, service offerings, storage capacity,
component layout (high level), memory upgrade information, and specifications?
A. Quickspecs
B. Illustrated Parts Catalog
C. Setup and Installation Guide
D. ProLiant Servers Troubleshooting Guide

11 .In direct attached mode, what is the maximum number of servers that can be connected to
the MSA500?
A. 1
B. 2
C. 4
D. 6
E. 8

12. Which Remote Management offering allows graphic and text virtual console?
A. iLO 2
B. RILOE II
C. iLO Advanced
D. Lights-Out 100

13.What is the only RAID level that can sustain two simultaneous drive failures?
A. RAID 0
B. RAID 0+1
C. RAID 4
D. RAID 6

14. You install a second processor in your DL380G4 but then the system does not power on
self test (POST) as expected. What is the first thing you should do?
A. Boot to the RBSU and run the server diagnostics to determine the issue.
B. Remove the second processor and upgrade the system ROM to the latest version.
C. Create a ROM diskette from ROM Based Setup Utility (RBSU) and flash the system
ROM.
D. Put the new processor into the primary socket and flash the system ROM to the latest
version.

15. DRAG DROP
Match the term with the definition.

16 Which statements are true regarding PCI-X technology?Select TWO.
A. In a PCI-X system the speed is determined by the fastest device.
B. Conventional PCI adapters can operate in PCI-X systems and vice versa.
C. A PCI-X adapter placed on a conventional PCI bus is not limited to conventional PCI
speeds.
D. PCI-X is forward and backward compatible with PCI 2.2 systems at the system,
device driver and adapter levels.

17 .What are the two essential building blocks of modular PDUs? Select TWO.
A. control unit
B. extension bars
C. SNMP/serial card
D. extended runtime module
E. 1U/0U mounting brackets

18. Wherecan youfind the latest ProLiant Support Pack (PSP)? Select TWO.
A. the latest SmartStart CD
B. the latest Firmware Maintenance CD
C. from www.hp.com drivers and updates
D. the latest HP ProLiant Systems Management CD

19. Whichstatementdescribes the ProLiant BL series servers?
A. ultra-dense and power-efficient
B. offers maximum internal expansion
C. self-contained, ready-to-go clustering solution
D. density optimized for rack-mounting environments

20 .Which HP utilityis usedto set cache read/write ratios for tuning performance?
A. Array Diagnostics Utility
B. Array Configuration Utility
C. HP Systems Insight Manager
D. Option ROM Configuration for Arrays


21. Why are blanking kits in an HP rack important?
A. to improve cooling
B. to improve rack stability
C. to improve appearances
D. to improve bottom-to-top airflow

22.You are troubleshooting data corruption issues on two HP ProLiant servers connected to
the same MSA1500. You suspect it is because both servers are trying to mount and use
the same LUNS (logical units). In the MSA1500, whichfeature can you enable and use to
ensure each server gets only the storage intended for it?
A. Secure Path Manager (SPM)
B. Advanced Data Guarding (ADG)
C. Selective Storage Presentation (SSP)
D. Option ROM Configuration for Arrays (ORCA )

23.Which HP CD/DVD set provides HP service and technical support information and
includes advisories, release notes, as well as, product documentation?
A. HP Services Media Library
B. HP Part Surfer Reference Set
C. HP Maintenance and Service Guide
D. Onsite Agent's Reference Set (OARS)

24. What are properties of Advanced Data Guarding? Select TWO.
A. It is recommended for up to 14 drives.
B. It protects against a ROM failure or corruption.
C. It protects against two simultaneous drive failures.
D. It allocates two sets of parity data across the drives and allows simultaneous write
operations.
E. It allocates half of the drive to data and the other half to mirrored data, providing two
copies of every file.

25 WhichHP web offering provides an easy way to get the most up to date parts information
without detailed instructions?
A. HP Part Surfer
B. HP SIM Homepage
C. HP Parts Exchange
D. HP Onsite Agent's Reference (OARS)

26 Which item is required to troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. network interconnect adapter
B. diagnostic adapter and station
C. server blade management module
D. Integrated Lights-Out remote console

27 What is the minimum number of drivesneeded in RAID ADG?
A. 2
B. 3
C. 4
D. 8

28 Which processor currentlyuses64-bit x86-based architecture?
A. Itanium
B. Pentium IV
C. AMD Opteron
D. Pentium III Xeon

29 Whatare special requirements for Online Spare Memory? Select TWO.
A. The second populated bank is used as the spare memory bank.
B. Online spare memory must be configured in the ROM-Based Setup Utility (RBSU).
C. The DIMMs in the spare bank must be the same size or larger than those in the other
banks.
D. When online spare memory is present, the spare memory bank is counted during the
power-on self-test (POST) and is added to the system memory count reported to the
operating system.

30 A customer would liketo move four 73GB universal SCSI drives from their DL380 to
their MSA1500. Whichdrive shelf must be used to support the four 73GB drives on the
MSA1500?
A. MSA20
B. MSA30
C. MSA50
D. MSA500

Comments

Unknown said…



Thank you so much! That did the trick, you saved me more endless hours of searching for a fix.



HP server
9 September 2013 at 23:03
Post a Comment

Popular posts from this blog

CCNA3 v4.0 Final Exam Answers Updated 2013 100%

By Solar Expert Advisory
1. Refer to the exhibit. A network administrator needs to add IP phones to the network. To which devices should the IP phones connect? AS1 and AS2 DS1 and DS2 DS1, DS2, and CS1 AS1, AS2, DS1, and DS2 2. Which CLI mode allows users to access all device commands, such as those used for configuration, management, and troubleshooting? user EXEC mode privileged EXEC mode global configuration mode interface configuration mode 3. Refer to the exhibit. Which Spanning Tree Protocol version is in effect? Per VLAN Spanning Tree (PVST) Per VLAN Spanning Tree + (PVST+) Common Spanning Tree (CST) Rapid Spanning Tree Protocol (RSTP) Multiple Spanning Tree Protocol (MSTP) 4. Refer to the exhibit. A network administrator has segmented the network into two VLANs and configured Router1 for inter-VLAN routing. A test of the network, however, shows that hosts on each VLAN can only access local resources and not resources on the other VLAN. What is the most likely cause of this pr...
36 comments
Read more

CCNA 2 EROUTING version 4 2013 FINAL EXAM ANSWERS 100%

By Solar Expert Advisory
CCNA 2 Final Exam 2013 v 4   1. Refer to the exhibit. A network engineer removes a new router from the shipping container and powers on the router to ensure it passes POST. Which port would the engineer use to perform the initial configuration? AUX console FE0/0 FE0/1 2. What is the purpose of the TTL field within an IP packet header? clears an unreachable route from the routing table after the invalid timer expires prevents regular update messages from inappropriately reinstating a route that may have gone bad removes an unreachable route from the routing table after the flush timer expires limits the period of time or number of hops a packet can traverse through the network before it should be discarded used to mark the route as unreachable in a routing update that is sent to other routers 3. When would the network administrator use the ip bandwidth-percent eigrp as-number percent command? when there is a low bandwidth connection when the co...
2 comments
Read more

CCNA 1 Final Examv3 Answers 2013

By Solar Expert Advisory
    1. Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which two statements are true about this setup? (Choose two.) The cable is suitable for connecting a switch to a router Ethernet port. The cable is suitable for connecting dissimilar types of devices. The cable is unusable and must be rewired. The cable is terminated in a way that the transmit pin is wired to the receive pin. The cable simulates a point-to-point WAN link. 2. Due to a security violation, the router passwords must be changed. What information can be learned from the following configuration entries? (Choose two.) Router(config)# line vty 0 3 Router(config-line)# password c13c0 Router(config-line)# login The entries specify three Telnet lines for remote access. The entries specify four Telnet lines for remote access. The entries set the console and Telnet password to “c13c0″. Telnet access will be denied because the Telnet ...
12 comments
Read more